CMD-VC1
Controller
Any CMD series amplifier can be controlled remotely with the CMD-VC1 wall-mounted networked / PoE controller. It is simple to install, set-up, configure, and customize for any installed system to manage any sound zone in a location. With PIN code protection for system security and access, you can change source and manage volume in a matter of seconds.
Features
Connect up to 8 x Wall-S1 per PowerZoneTM Connect amplifier
Allocate any Wall-S1 to any sound zone in the PowerZoneTM Control web app
Easily change source or manage volume in a zone – with pre-set minimum and maximum levels
PoE for easy network pairing, real-time device syncing with system and controller power supply
PIN code protection for both basic and advanced access, including system shutdown when leaving a location Intuitive menu for easy installation and system set-up – also easy handover to users
Customisable screen and backlight allowing brightness and colour control
Danish-designed, high-performance polymer material with a touch-friendly matte finish and concealed screws Available in standard white RAL9003 and black RAL9005
Works with PowerZoneTM Connect amplifiers
Features
Connect up to 8 x Wall-S1 per PowerZoneTM Connect amplifier
Allocate any Wall-S1 to any sound zone in the PowerZoneTM Control web app
Easily change source or manage volume in a zone – with pre-set minimum and maximum levels
PoE for easy network pairing, real-time device syncing with system and controller power supply
PIN code protection for both basic and advanced access, including system shutdown when leaving a location Intuitive menu for easy installation and system set-up – also easy handover to users
Customisable screen and backlight allowing brightness and colour control
Danish-designed, high-performance polymer material with a touch-friendly matte finish and concealed screws Available in standard white RAL9003 and black RAL9005
Works with PowerZoneTM Connect amplifiers
Specifications
Model | CMD VC-1 |
Input Rating | Connector: RJ45 Cables: Category 5e or faster STP cables PoE Class I device, 48V |
Power Consumption | PoE Class 1 / 3.84 W max |
Dimensions (H x W x D) | EU: 86mm x 86mm x 49mm |
Weight | EU: 120g |
Operating Temperature Range | 0-40°C |
Colour | White / Black |
Display Screen Resolution | 240 x 240 pixels |
Display Screen Type | RGB, Transmissive / Normally Black |
Display Screen Material | High gloss polished transparent acrylic |
Standby Modes | 6 settings available: 30 secs, 2 mins, 5 mins, 15 mins, 30 mins, 60 mins |
Maximum Cable Length (CAT 5e) | 100m (328ft) |
IP Rating | IP 30 |